Beli by Phone , Hubungi Kami :
(021) 6882 6710  |  (021) 7090 5889
__________________________________
Hours ( WIB )
M - F
S A T
S U N
: 10.30 - 18.00
: 10.30 - 16.00
: TUTUP / OFF
__________________________________
Main Product
Microphone Kabel  /  Wired Microhone   >>   Toa ZM-260 Dynamic Microphone
Bookmark and Share
TOA ZM-260
Other image - Gambar lain dari produk
Microphone Kabel.
Jenis Dynamic Uni-Directional+Low-Impedance.
Rendah suara feedback yang biasa terjadi. Panjang kabel
hingga 7.5 meter. Sesuai untuk berbagai jenis Amplifier
pada umumnya.
Rp 289.000
Cek Tarif Kirim
Berat Kirim : 2 kgs - Garansi : GRM
--------------------------------------------------------------------------------------------------------------------------------------

Descriptions

Microphone Kabel.
Jenis Dynamic Uni-Directional+Low-Impedance.
Rendah suara feedback yang biasa terjadi. Panjang kabel hingga 7.5 meter. Sesuai untuk berbagai jenis Amplifier pada
umumnya.

Features

• Dynamic Microphone (Dynamic microphones don't require their own power supply like condenser microphones)

• Uni-Directional
The primary difference between Omni-Directional Microphones and Uni-Directional Microphones is that Omni-
Directional Microphones pick up sound 360 degrees around, while Uni-Directional Microphones must be pointed at
the source of the sound in order to pick it up.

• Low-Impedance
A high impedance microphone has an impedance from 10,000 to 100,000 ohms, depending on the model. The most
common values range between 10,000 and 50,000 ohms. About the only reason to purchase a high impedance
microphone is for budget reasons. They generally cost less than a comparable low impedance microphone.

Low impedance microphones have an impedance between 50 and 600 ohms. The most common specification is 150
to 250 ohms. A major advantage of low impedance microphones is their ability to be used with long cables. A
microphone cable made with a popular cable like Belden 8412 could be run over 400 feet with a 150 ohm
microphone. Even at that distance there would be only a slight loss (1 dB) of high frequency signal at 10,000 Hz.

Low impedance microphones usually have balanced outputs . This means the microphone cable has two inner
conductors (wires) to carry the tiny microphone signal. The two wires are surrounded by an outer conductor called
the shield. The shield does not carry any signal. Its job is to provide an electrical shield to keep unwanted radio and
other noise away from the inner two wires. A balanced cable will give much better immunity to electrical and radio
noise than an unbalanced cable.

Specifications

• Microphone Type: Dynamic
• Directivity: Uni-Directional
• Frequency Response: 100 - 12,000 Hz
• Output Level: -75 dB (0 dB = 1V / 0.1 Pa)
• Nominal Impedance: 600Ω Unbalanced
• Cable: 7.5 meter
• Talk Switch: Short - Off Type
• Accessory: Microphone Holder (W 5/16" 18 thread)
• Weight: 420 gr

Package Contents

• Main Unit Toa ZM-260
• Mic Holder
--------------------------------------------------------------------------------------------------------------------------------------
Rp 289.000
Cek Tarif Kirim
KLIKORDER untuk Membeli Barang.  Anda juga bisa Memesan Melalui Telephone , SMS , Fax, BlackBerry Msg ke  :
PH : (021) 6882 6710 - (021) 7090 5889
HP : (SMS) 0816 481 5887 - 0813 87511 835
FX : (021) 612 9629
BB : 26271aba

DIRECTBUY. Anda juga bisa Melakukan Pembelian secara Langsung ke Showroom Kami dengan Alamat :
Harco Mangga Dua Plaza Blok A Lt.1 No.79 ( depan eskalator ), Jl. Mangga Dua Raya - Jakarta Pusat 10730
note :
1. stok dan harga produk tidak mengikat, bisa berubah sewaktu - waktu
2. Spesifikasi dan design dari manufaktur bisa berubah tanpa pemberitahuan dahulu
3. terima kasih atas pengertian dari Customer